10 TON MODEL
- PTO Drive (540 or 1,000 RPM)
- Low Profile(36" tall) And Center Of Gravity For Safer Transporting
- Eight 11L X 15 (8 ply) Flotation Tires On Tandem Dual Oscillating Axles
- 72" Flotation Roller
- Six Or Eight Heavy Duty Chain Boxes (3" X 7")
- Hydraulically Activated Gear Changes (bed chains)
- Rugged A-Frame Hitch
- Tough 6" X 6" Box-Beam Mainframe
- High-Strength Roller Chain (No. 2062) With Special Lugs
- 3 1/2" X 10" Tilt Cylinder (Hydraulic Lines Included)
| Specifications Overall Width................................12 ft. Overall Length...............................30 ft. Stack Bed Length...................25 ft. 3 in. Height(ground to top of bed).........36 in. Ground Clearance.........................15 in. Approximate Weight...............6,500 lbs. Tires(flotation).............11L X 15 (8 Ply) Load Capacity............................10 tons |
Tractor Requirements 1. 100 plus horsepower preferred 2. 1 3/8" diameter PTO shaft 540 or 1,000RPM(specify when ordering) 3. Roll-over Protective Structure (rops) 4. Two Sets of remote hydraulic connections 5. 10,000 lbs. weight on rear tires; 5,000 lbs. on front tires(unloaded) 6. Adequate braking power to stop itself and loaded mover. Brakes must be in good working order |
|
FAST, RUGGED, ECONOMICAL |
||
15 TON MODEL
- PTO Drive (540 or 1,000 RPM)
- Low Profile(36" tall) And Center Of Gravity For Safer Transporting
- Eight 11L X 16 (12 ply) Industrial Road Tires On Tandem Dual Osciallating Axles
- 2 - 38" Flotation Rollers
- 10 Heavy Duty Chain Boxes (3" X 7" X 3/16
- Hydraulically Activated Gear Changes (bed chains)
- Rugged A-Frame Hitch
- Tough 6" X 6" Box-Beam Mainframe
- High-Strength Roller Chain (No. 2062) With Special Lugs (optional 2082)
- 2 - 3 1/2 X 10" Tilt Cylinders (hydraulic lines included)
| Specifications Overall Width................................16 ft. Overall Length...............................37 ft. Stack Bed Length..........................32 ft. Height(ground to top of bed).........36 in. Ground Clearance.........................15 in. Approximate Weight...............9,500 lbs. Tires(flotation)...........11L X 16 (12 Ply) Load Capacity............................15 tons |
Tractor Requirements 1. 100 plus horsepower (preferred) 2. 1 3/8" diameter PTO shaft 540 or 1,000 RPM (specify when ordering) 3. Roll-Over Protective Structure (rops) 4. Two sets of remote hydraulic connections 5. 10,000 lbs. Weight on rear tires: 5,000 lbs. on tires (unloaded) 6. Adequate braking power to stop itself and loaded mover. Brakes must be in good working order. |
|
FAST, RUGGED, ECONOMICAL |
||